Racing Mower Parts - Wheels and Tyres
Aluminium 5" inch rim. Normally used for group 3 / lawnbug front wheels. Central bearing, to fit a 17mm stub axle. Supplied with valve.
Please Note: The offset on these rims has recently changed by 5mm, and the distance between the bearings has also been reduce by 5mm. We can supply spacers to accomodate the change if required, please contact us.
Please Note: The offset on these rims has recently changed by 5mm, and the distance between the bearings has also been reduce by 5mm. We can supply spacers to accomodate the change if required, please contact us.
6003 2RS wheel bearing, double rubber shielded to stop water and dirt ingress. Used normally for group 3, 5 inch alloy rims with intergral bearings.
Aluminium 5" inch split rims. Normally used for group 3 / lawnbug front wheels. Sold as inners, outers and complete sets. Please note these have a different PCD mounting to the 6 inch rims. Front and rear hubs are available.
The new improved Vortex P6 Rim from R & M Racing. Aluminium, 6 inch diameter rim with the standard width of 120mm, for use on group 4's and group 3 rears. Designed to meet the enduring requirements of mower racing, featuring bead locks for tyre retention at low pressures, but with improved sealing for stable tyre pressures. Supplied with valve and bead lock bolts.
Vortex P6 - 6 Inch x 120mm Wheel Rim Set of 4
161.99 Out of StockThe new improved Vortex P6 Rim from R & M Racing. Aluminium, 6 inch diameter rim with the standard width of 120mm, for use on group 4's and group 3 rears. Bundle of 4.
Replacement pull in valve for the Vortex P6 rim or other rims.
Replacement bead lock sealing washers as used on our Vortex P6 rims. Price each.
Replacement high quality orings for use with rims with bead locks. Supplied in 10's. Handy spares to prevent punctures.
Replacment bead lock bolts, used in conjunction with bead lock orings, on 6 inch rims, to prevent tyres coming off the rim.
M8 nyloc, flanged, wheel nuts. Non-serrated flange, so not to cause damage to alloy wheels, but retaining excellent resistance to coming loose. Can be used on front or rear wheels, or other application where a flange nut is required. Supplied in 10's.
Guide To Tyre Sizes
- Group 3
- Front : 11 x 4.00 - 5
- Rear : 13 x 5.00 - 6
- Group 4
- Front : 13 x 5.00 - 6
- Rear : 15 x 6.00 - 6
Turf Saver Tyre 16 x 6.50 - 8
22.99 Out of StockTurf saver tyre, brands and tread patterns may vary, available and stocked in the sizes above. Great for anybody racing on a budget.
Duro HF224 or similar 4 ply tyres, turf tread pattern, available and stocked in the sizes above.
Duro HF224 or similar 4 ply tyres, turf tread pattern, available and stocked in the sizes above.
Duro HF224 or similar 4 ply tyres, turf tread pattern, available and stocked in the sizes above.
Trelleborg T-539, aggressive turf tread pattern.
Trelleborg T-539, aggressive turf tread pattern.
Duro HF213 4 ply tyres, aggressive turf tread pattern.
Kenda K383 tyres, 15 x 6.0 - 6, knobbly tread pattern, popular group 4 rear tyre.
Wanda P519 tyres, 13 x 5.0 - 6, knobbly tread pattern, can be used for group 4 fronts or group 3 rear tyres.
Heidenau ice tyre, 11 x 4.50 - 5, specially designed for racing on ice and well suited to studding. Can also be used by some clubs on turf and muddy conditions. Not suitable for BLMRA or NWLMRA events.
Wanda P533 15 x 5.00 - 6 Ice / Snow Blower Tyres
26.99 Out of StockWanda Ice / Snow Blower Tyres well suited to studding. Can also be used by some clubs on turf and muddy conditions (WMLMRA wet rules). Not suitable for BLMRA or NWLMRA events.
Please note these tyres are undersized in diameter, despite being marked up the correct size. 13 x 4.00 - 6 is approx 12 inches in diameter ,15 x 5.00 - 6 is approx 13.5 inches in diameter.
Please note these tyres are undersized in diameter, despite being marked up the correct size. 13 x 4.00 - 6 is approx 12 inches in diameter ,15 x 5.00 - 6 is approx 13.5 inches in diameter.